Qarms QND air block upgrade
Product number:
QNDup
Available stock:
1
Your benefits
- Advice from active players
- 14 days money back guarantee
- Best Team Deals
Product information "Qarms QND air block upgrade"
This small but nice component is an upgrade to close the gap between the handle and the air block, which has a great visual effect but also prevents sand and dirt from finding their way into your EMF100.
The upgrade fits every QND, QNDplus and QNDplus SLIM regardless of whether gen1 or gen2.
| Color: | Black |
|---|---|
| Material: | aluminum |
Accessory Items
New
not in stock
Q Arms QNDplus EMF100 Drop Down Airstock (gen3)
€249.90*
The QNDplus gen2 Drop Down Airstock for EMF100 is a NON DESTRUCTIVE solution for our EMF100!!!
What does the “plus” mean in QNDplus?!
Qarms has managed to bring the already well-known QND Drop Down ASA Airstock onto the market with that certain PLUS.
With the QNDplus you now have the world's only drop down ASA where you no longer have to do without the unique ventilation of the EMF100, i.e. the ASA ON / OFF function.
By flipping a small lever, the EMF100 is depressurized and is therefore no longer capable of firing or the HPA bottle can be unscrewed from the marker very easily and without resistance.
Here, in the spirit of Planet Eclipse, we have of course made sure that, like the original, the function is available for left-handed and right-handed people.
What does NON DESTRUCTIVE mean?!
Nothing needs to be changed, manipulated or even sawed on the frame of the EMF100. This means you have no reduction in the value of your marker.
The conversion takes about 6 minutes and only requires three of the Allen keys, which are supplied as standard with the EMF100, and a small pair of needle-nose pliers and ideally a small combination pliers
you can remove the POPS pin and the POPS pin insert from the original air block. Just watch the linked video
Almost plug and play and it can really be done by anyone, even if you claim to have two left hands.
An important point is the maintenance of the EMF100. All you have to do is loosen the two screws that fix the dropdown ASA and it can be removed.
Now the bolt cap and then the bolt itself can be removed as usual.
What is GENERATION 3 (gen3)!?
Small changes have been made. The first change is to adapt it to the MCS aluminum body, put it on, tighten it, play!! The second change is the ease of use, the small switches on the left and right have been lengthened slightly, which means that gen1 and gen2 can now be clearly distinguished visually. The third change is that the gap between the handle and the air block has been closed with a new component. The gen3 can now be clearly recognized from this. On top there is now a locking clip for the handle.All Qarms QND+ delivered from November 2023 are gen2. and all those delivered from May 2024 are gen3.
Scope of delivery:1x Dropdown ASA (including O-ring)2x fixing screws for dropdown1x air pipe made of stainless steel (including cover for the visible area)1x air block (including O-ring)1x complete set of O-rings to replace1x locking clip for the handle
100% made in Austria
4
in stock
Q Arms QND EMF100 Drop Down Airstock (gen3)
€199.90*
QND Drop gen2 Down Airstock for EMF100 is NON DESTRUCTIVE for our EMF100!!! What does that mean ?!
Nothing needs to be changed, manipulated or even sawed on the frame of the EMF100. This means you have no reduction in the value of your marker.
The conversion takes about 5 minutes and only three of the Allen keys that are supplied as standard with the EMF100. HOW TO INSTALL VIDEO
Almost plug and play and it can really be done by anyone, even if you claim to have two left hands.
An important point is the maintenance of the EMF100. All you have to do is loosen the two screws that fix the dropdown ASA and it can be removed.
Now the bolt cap and then the bolt itself can be removed as usual.
What is GENERATION 3 (gen3)!?
Small changes have been made. The first change is to adapt it to the MCS aluminum body, put it on, tighten it, play!! Second change is that the gap between the handle and the air block has been closed with a new component. The gen3 can also be easily recognized from this. On top there is now a locking clip for the handle.All Qarms QND delivered from April 2024 are gen2. and all QNDs delivered from May 2024 are gen3.
Scope of delivery:1x Dropdown ASA (including O-ring)2x fixing screws for dropdown1x air pipe made of stainless steel (including cover for the visible area)1x air block (including O-ring)1x complete set of O-rings to replace1x locking clip for the handle
LINK TO THE INSTALL VIDEO
1
in stock
New
Q Arms QNDplus SLIM EMF100 Drop Down Airstock (gen3)
€249.90*
The QNDplus SLIM gen2 Drop Down Airstock for EMF100 is a NON DESTRUCTIVE solution for our EMF100 and in collaboration with Styrian Custom Paintball SCP we have tailored the QNDplus to exactly that
Kontor adapted from the well-known SLIM BODY from SCP. Of course, the QNDplus SLIM can also be used on any standard EMF100.
What does the “plus” mean in QNDplus?!
Qarms has managed to bring the already well-known QND Drop Down ASA Airstock onto the market with that certain PLUS.
With the QNDplus you now have the world's only drop down ASA where you no longer have to do without the unique ventilation of the EMF100, i.e. the ASA ON / OFF function.
By flipping a small lever, the EMF100 is depressurized and is therefore no longer capable of firing or the HPA bottle can be unscrewed from the marker very easily and without resistance.
Here, in the spirit of Planet Eclipse, we have of course made sure that, like the original, the function is available for left-handed and right-handed people.
What does NON DESTRUCTIVE mean?!
Nothing needs to be changed, manipulated or even sawed on the frame of the EMF100. This means you have no reduction in the value of your marker.
The conversion takes about 6 minutes and only requires three of the Allen keys, which are supplied as standard with the EMF100, and a small pair of needle-nose pliers and ideally a small combination pliers
you can remove the POPS pin and the POPS pin insert from the original air block. Just watch the video linked below.
Almost plug and play and it can really be done by anyone, even if you claim to have two left hands.
An important point is the maintenance of the EMF100. All you have to do is loosen the two screws that fix the dropdown ASA and it can be removed.
Now the bolt cap and then the bolt itself can be removed as usual.
What is GENERATION 3 (gen3)!?
Small changes have been made. The first change is to adapt it to the MCS aluminum body, put it on, tighten it, play!! The second change is the ease of use, the small switches on the left and right have been lengthened slightly, which means that gen1 and gen2 can now be clearly distinguished visually. The third change is that the gap between the handle and the air block has been closed with a new component. The gen3 can now be clearly recognized from this. On top there is now a locking clip for the handle
Scope of delivery:1x Dropdown ASA (including O-ring)2x fixing screws for dropdown1x air pipe made of stainless steel (including cover for the visible area)1x air block (including O-ring)1x complete set of O-rings to replace1x locking clip for the handle
100% made in Austria
More Products from +++ Q ARMS +++ to look at
6
in stock
Q Arms Adapter für X-Tracer68 (EMF)
€41.90*
Q Arms adapter for the Umarex X-Tracer68 with SHAFT EMF thread (EMF) so barrels with EMF left-hand thread can be used
Shaft EMFshaft quakeShaft FR
8
in stock
Q Arms Adapter für X-Tracer68 (MT)
€41.90*
Q Arms adapter for the Umarex X-Tracer68 with METRIC thread (MT) so barrels with metric muzzle thread can be used.
HammerHead One Shot BarrelsTGR2 barrelMarksmann barrelsvarious RAP4 barrels
13
in stock
Q Arms Adapter für X-Tracer68 (ST)
€41.90*
Q Arms adapter for the Umarex X-Tracer68 with INCH thread (ST) so barrels with inch muzzle thread can be used.
Lapco runsNemesis runsEclipse S63 Tactical Muzzle AdapterHammerHead barrels of the FIN series (One Shot does not fit)
3
in stock
Q Arms AS BigBoy INSERT for RM silencer
€49.90*
The custom-made Qarms BigBoy RM INSERT is the complement for the Qarms BIGBOY RM (RearMount) Silencer series.
Does NOT work with FM (FrontMount) series !!!
This insert causes an enormous reduction in volume and a massive change in sound, from a sharp muzzle blast to a dull noise.
The supplied transport and maintenance tube prevents the insert from buckling outside of the silencer, and the tube also ensures that the inside of the insert remains smooth for longer.
IMPORTANT: after a paint burst, the insert can be cleaned with CLEAR water, do not use detergent !! Be sure to use the care pipe to dry and until the next game
just leave it in the insert. You can air dry it, place the insert on the radiator or dry it in the oven at a maximum of 60 degrees.
1
in stock
Q Arms AS FatBoy INSERT silencer
€59.90*
This is the appropriate INSERT for the AS FATBOY Silencer models, which causes an enormous reduction in volume and a massive change in sound.
The volume reduction in airsoft ONLY has a noticeable effect on airsoft rifles operated with compressed air (HPA)!! The stronger the pressure of the gun, the stronger the reduction...
HPA - very strong effect CO2 - effect good GAS - effect weak AEG - No effect 100% Made in Austria
1
in stock
Q Arms AS FATBOY OPS 24mm CW silencer
€199.00*
With the Silencer FATBOY, Q Arms has created the third and largest silencer in the BOY series, which is available for three thread types (14mm CW - 14mm CCW - 24mm CW). The Qarms Fatboy is basically designed for HPA weapons and is aimed at players who take on the role of sniper.
Of course it can be used on all other markers and also in the CQB area if you want to give your airsoft weapon a really bad look.
The unique matt Black OPS design stands out on every playing field and gives your marker a completely new look. In addition, there is a matching insert for the Fatboy RM models which causes an enormous volume reduction and a massive change in sound.
The volume reduction in airsoft ONLY has a noticeable effect on airsoft rifles operated with compressed air (HPA)!! The stronger the pressure of the gun, the stronger the reduction... HPA - effect very strong CO2 - effect good GAS - effect weakAEG - No effect 100% Made in Austria
100% Made in Austria
not in stock
Q Arms BIGBOY BEEFY RM silencer (EMF)
€139.90*
With the Silencer BIGBOY series, Q Arms has created a silencer that comes in three designs (BLANK - GRIP - BEEFY), for three thread types (imperial ST - metric MT-shaft EMF) and two mounting options (lengthening RM - shortening FM).
The unique design stands out on every field and gives your marker a completely new look. It doesn't matter whether it's a 7/8 inch or 1 inch barrel diameter, whether it's a metric muzzle thread, imperial muzzle thread or shaft EMF, shaft quake or shaft FR left-hand thread, there is the right Qarms BIGBOY Silencer for your marker.
In addition, there is a suitable insert for the Bigboy RM models, which causes an enormous reduction in volume and a massive change in sound.
100% Made in Austria
Fits barrel backs with:
shaft EMFshaft FRshaft Quake
4
in stock
Q Arms BIGBOY BEEFY RM silencer (MT)
€139.00*
Mit der Silencer BIGBOY Serie hat Q Arms einen Schalldämpfer geschaffen welcher in drei Designs (BLANK - GRIP - BEEFY), für drei Gewindearten (zöllig ST - metrisch MT- shaft EMF) und zwei Montagemöglichkeiten (verlängernd RM - verkürzend FM) daherkommt.
Das einzigartige Design fällt auf jedem Spielfeld auf und gibt deinem Markierer einen vollkommen neuen Look. Egal ob 7/8 zoll oder 1 zoll Laufdurmesser, egal ob metrisches Muzzlegewinde, zölliges Muzzlegewinde oder shaft EMF, shaft quake oder shaft FR Linksgewinde es gibt den passenden Qarms BIGBOY Silencer für deinen Markierer.
Zusätzlich gibt es zu den Bigboy RM Modellen ein passendes Insert welches eine enorme Lautstärkenreduktion sowie eine massive Klangveränderung bewirkt.
100% Made in Austria
HammerHead One Shot Läufe
TGR2 Lauf
Marksmann Läufe
diverse RAP4 Läufe
4
in stock
Q Arms BIGBOY BEEFY RM silencer (ST)
€139.00*
Mit der Silencer BIGBOY Serie hat Q Arms einen Schalldämpfer geschaffen welcher in drei Designs (BLANK - GRIP - BEEFY), für drei Gewindearten (zöllig ST - metrisch MT- shaft EMF) und zwei Montagemöglichkeiten (verlängernd RM - verkürzend FM) daherkommt.
Das einzigartige Design fällt auf jedem Spielfeld auf und gibt deinem Markierer einen vollkommen neuen Look. Egal ob 7/8 zoll oder 1 zoll Laufdurmesser, egal ob metrisches Muzzlegewinde, zölliges Muzzlegewinde oder shaft EMF, shaft quake oder shaft FR Linksgewinde es gibt den passenden Qarms BIGBOY Silencer für deinen Markierer.
Zusätzlich gibt es zu den Bigboy RM Modellen ein passendes Insert welches eine enorme Lautstärkenreduktion sowie eine massive Klangveränderung bewirkt.
100% Made in Austria
Lapco Läufe
Nemesis Läufe
Eclipse S63 Tactical Muzzle Adapter
HammerHead Läufe der FIN Serie (widow maker, battle stixx, bang stixx)
4
in stock
Q Arms BIGBOY BLANK RM silencer (EMF)
€139.00*
Mit der Silencer BIGBOY Serie hat Q Arms einen Schalldämpfer geschaffen welcher in drei Designs (BLANK - GRIP - BEEFY), für drei Gewindearten (zöllig ST - metrisch MT- shaft EMF) und zwei Montagemöglichkeiten (verlängernd RM - verkürzend FM) daherkommt.
Das einzigartige Design fällt auf jedem Spielfeld auf und gibt deinem Markierer einen vollkommen neuen Look. Egal ob 7/8 zoll oder 1 zoll Laufdurmesser, egal ob metrisches Muzzlegewinde, zölliges Muzzlegewinde oder shaft EMF, shaft quake oder shaft FR Linksgewinde es gibt den passenden Qarms BIGBOY Silencer für deinen Markierer.
Zusätzlich gibt es zu den Bigboy RM Modellen ein passendes Insert welches eine enorme Lautstärkenreduktion sowie eine massive Klangveränderung bewirkt.
100% Made in Austria
5
in stock
Q Arms BIGBOY BLANK RM silencer (MT)
€139.00*
Mit der Silencer BIGBOY Serie hat Q Arms einen Schalldämpfer geschaffen welcher in vier Designs (BLANK - GRIP - BEEFY - QUAD), für drei Gewindearten (zöllig ST - metrisch MT- shaft EMF) und zwei Montagemöglichkeiten (verlängernd RM - verkürzend FM) daherkommt.
Das einzigartige Design fällt auf jedem Spielfeld auf und gibt deinem Markierer einen vollkommen neuen Look. Egal ob 7/8 zoll oder 1 zoll Laufdurmesser, egal ob metrisches Muzzlegewinde, zölliges Muzzlegewinde oder shaft EMF, shaft quake oder shaft FR Linksgewinde es gibt den passenden Qarms BIGBOY Silencer für deinen Markierer.
Zusätzlich gibt es zu den Bigboy RM Modellen ein passendes Insert welches eine enorme Lautstärkenreduktion sowie eine massive Klangveränderung bewirkt.
100% Made in Austria
HammerHead One Shot Läufe
TGR2 Lauf
Marksmann Läufe
diverse RAP4 Läufe
3
in stock
Q Arms BIGBOY BLANK RM silencer (ST)
€139.00*
Mit der Silencer BIGBOY Serie hat Q Arms einen Schalldämpfer geschaffen welcher in drei Designs (BLANK - GRIP - BEEFY), für drei Gewindearten (zöllig ST - metrisch MT- shaft EMF) und zwei Montagemöglichkeiten (verlängernd RM - verkürzend FM) daherkommt.
Das einzigartige Design fällt auf jedem Spielfeld auf und gibt deinem Markierer einen vollkommen neuen Look. Egal ob 7/8 zoll oder 1 zoll Laufdurmesser, egal ob metrisches Muzzlegewinde, zölliges Muzzlegewinde oder shaft EMF, shaft quake oder shaft FR Linksgewinde es gibt den passenden Qarms BIGBOY Silencer für deinen Markierer.
Zusätzlich gibt es zu den Bigboy RM Modellen ein passendes Insert welches eine enorme Lautstärkenreduktion sowie eine massive Klangveränderung bewirkt.
100% Made in Austria
Lapco Läufe
Nemesis Läufe
Eclipse S63 Tactical Muzzle Adapter
HammerHead Läufe der FIN Serie (widow maker, battle stixx, bang stixx)
Kunden kauften auch
Sale
2
in stock
15
%
Variants
14
%
not in stock
Variants
14
%
not in stock
Variants
36
%
not in stock
